Design Your Door
Where To BuyGarage Door Maintenance Guide
As a prominent feature of your home's façade, the condition of your garage door can have a big impact on your home's appearance and value. Regular maintenance can help keep your door looking great and operating smoothly for years to come. Occasionally checking on your garage door can also prevent it from needing expensive repairs down the road.
If you find parts that need replacing during your garage door maintenance, swap them out if possible. You can purchase parts through most garage door dealers or at The Home Depot. Avoid replacing some of the more complicated hardware, as you could injure yourself or the door without proper training.
Clopay® garage doors are built to last, but some parts do occasionally wear out or become damaged. Virtually any component of the door can be replaced. If you are reasonably handy and follow the instructions in your installation manual you can do some repairs yourself. Our DIY replacement parts include:
Rollers & Bottom Seal
Hinges
Lift Handles
Windows & Inserts
We recommend the following repairs be handled by a
garage door repair professional
Springs
Door Sections
Track
Operator
A quick review of your garage door's components can be a great way to ensure your door continues to operate consistently. Review these areas at least annually and as often as every three months:
Springs
- Are your springs broken?
- Are the springs properly tensioned? If you have an automatic opener, test your spring tension by closing your door and pulling the string on your opener to disconnect it. Then open the door halfway. If it does not remain still, your springs are broken or need adjustment.
- If your springs are broken or improperly tensioned, do not adjust or remove them yourself. Contact a qualified garage door repair professional.
Cables
- Are there any worn strips hanging loose on the sides of your garage door?
- Are the cables frayed?
- If the cables are frayed, they are in danger of breaking and could cause serious injury or property damage. Worn strips could also get caught and cause issues. Contact a professional to replace the cables.
Rollers
- Do the rollers on the ends of your door move smoothly and quietly? If not, they may require lubrication or replacement.
- Clopay® recommends a high-quality nylon roller for the smoothest and quietest operation.
Panel Sections
- Is the paint peeling or fading?
- If the door uses metal in its construction, is it rusted or heavily dented?
- If dents are minor and your door is uninsulated, you may be able to push out the dings from the inside of the door. Have heavily dented doors inspected by a Clopay® Dealer.
- Care & Maintenance Tip: Lubricating Noisy Wheel Rollers
Windows
- Are the windows broken or cracked?
- If your windows are cracked or broken, contact your Clopay® Dealer, as they can provide replacement windows or sections as needed.
Bottom Weather Seal
- Your garage door's bottom weather seal is a flexible strip that helps prevent heat loss at the bottom of the door. It also helps to keep out water, dirt, and pests.
- Does the weatherstripping show cracks, or signs of visible wear?
- Place your hand along the bottom of your garage door. Do you feel a draft of cold air coming into your garage?
- If you feel a draft or your weather seal is cracked, it is time for replacement. Contact your Clopay® Dealer or The Home Depot to purchase a replacement.
Track
- Are the tracks on either side of your garage door bent or twisted?
- Are they securely attached to the door jambs and the ceiling via the rear track hangers?
- If you have issues with your track, contact a professional for repair. Track issues can contribute to added stress on your opener.
Hinges
- Are the hinges that join the door sections bent or broken? If so, they should be replaced.
- Caution: The bottom brackets on all garage doors must not be removed while the door is under tension. Clopay recommends contacting a garage door maintenance professional to replace your hinges.
Care and Maintenance: Lubricating Noisy Wheel Rollers
Download Brochure
Here are six steps you can take to maintain your garage door.
Clean The Tracks
Use a small brush to clean the tracks, then gently wipe them with a damp cloth.
Tighten Hardware
Use a wrench, socket or screwdriver to tighten loose brackets, bolts and screws.
Lubricate Moving Parts
Lubricate door hinges, rollers (except nylon rollers) Sheave bearings, torsion springs and all lift cables annually.
Test Safety Features
Test the pressure sensor and auto-reverse as well as the photoelectric sensor.
Check The Balance
Pull the opener's automatic release handle and lift the door until it's halfway open. If it's balanced, the door will stay open halfway.
Repaint Or Stain Doors
Painting instructions specific to your door model can be found in your owner's manual.
Find A Clopay Dealer Near You For Garage Door Maintenance Services
Clean The Tracks
Over time, dirt, debris and rust can build up in your garage door's tracks. This build-up can prevent your garage door from working correctly and cause problems. Use a small brush to clean the tracks and parts carefully, then gently wipe them down with a damp cloth.
Tighten Hardware
As you use your garage door over and over, the vibration of the door can loosen the components. Use a wrench, socket or screwdriver to tighten loose brackets, bolts and screws. Be careful not to overtighten the hardware — overtightening can cause stripping or damage to the door parts. If you come across any smaller rusted or damaged parts, you can replace them.
Lubricate Moving Parts
Lubricate door hinges, rollers (except nylon rollers), sheave bearings, torsion springs and the lift cables at the bottom corners of the door annually with Clopay Pro-Lube. Lubricant allows door hardware to work smoothly and correctly. Improperly lubricated components can stick and prevent the door from working. Garage door lubrication is essential to avoiding damage, wear and loud noises. You can purchase Clopay Pro-Lube from your Clopay® Dealer or at The Home Depot.
Test Safety Features
While performing your garage door maintenance, always test the safety features. Checking these features keeps you and your family safe from accidents and injury when using the garage door. Automatic doors typically come with pressure sensors and auto-reverse, which prevent the door from closing on an object in the garage door's path.
To test the pressure sensor and auto-reverse, have the garage door close on a small plank of wood or solid object. When the door touches the object, it should reverse and open. If it fails to reverse after touching the object, have a professional inspect and repair or replace your pressure sensor to prevent accidents.
You'll need a long object like a broom to test the photoelectric sensor. Begin automatically closing the garage door, then wave the broom underneath the closing door. If the sensor is working correctly, the door should reverse. If it doesn't, the sensor isn't responding correctly and will need a professional inspection.
Check The Balance
The spring tension affects the door balance. Tension that is too low or too high makes your opener work harder, straining the system and leading to unnecessary wear and tear. To test the balance, pull the opener's automatic release handle and lift the door until it's halfway open. Balanced doors will stay open halfway, but unbalanced doors will close or open themselves. Don't attempt to fix the balance yourself — call a professional to get your balance corrected.
Repaint or Stain Doors
Wood garage doors will need to be checked yearly for cracking, peeling paint or fading. Wood garage doors must be painted or stained on all sides before installation and refinished every few years, depending on your area's exposure and weather conditions. Unless you want to change the color, steel, composite or aluminum garage doors do not need to be repainted. Painting instructions specific to your door model can be found in your owner's manual.
